Manual | Solar 2150 Wire Feed Welder

Infinitely adjustable from 50 to 700 inches per minute, accommodating wire diameters of .024, .030, and .035 inches. Control Interface:

| Material Thickness | Voltage Setting (Dial Letter) | Wire Speed (Knob 1-10) | Wire Type | Gas | | --- | --- | --- | --- | --- | | 22 gauge (0.8mm) | A | 3 | .023 Solid | C25 | | 18 gauge (1.2mm) | B | 4.5 | .023 Solid | C25 | | 16 gauge (1.5mm) | C | 5 | .030 Solid | C25 | | 1/8" (3mm) | D | 6 | .030 Flux | None | | 3/16" (4.8mm) | E | 7 | .035 Flux | None | | 1/4" (6mm) (Multi-pass) | F | 8 | .035 Flux | None | solar 2150 wire feed welder manual

"You see that?" Miller asked. "You have the switch set to 'Tap 1'. That's the lowest voltage. Now, look at the wire feed speed dial on the front. You cranked that to max speed because you were in a hurry." Infinitely adjustable from 50 to 700 inches per

The is a vintage 110-amp MIG / wire-feed welder originally manufactured by Century. Because this line has long been discontinued, standard manufacturer landing pages no longer host a simple PDF download button. ⚡ How to Find the Manual & Parts That's the lowest voltage