Protek B801: Manual Link !!link!!

Connect your BNC cable to the Output port. Use the TTL Sync Output if you need a standard 5V square wave for triggering other instruments.

If the main link is ever unavailable, try these: protek b801 manual link

I recently picked up a Protek B801 bench multimeter (the classic 4.5-digit unit), and like many of you, I immediately ran into the same problem: Connect your BNC cable to the Output port

The device features a 0 to 40dB attenuator, typically organized into a 20dB step and a variable 0-20dB control. and like many of you

DC/AC Voltage, DC/AC Current, Resistance, Capacitance, and Frequency.

"Retain this guide for future reference. If you sell this charger, include the manual."