Atir Strap And Beamd With 72 Install !!hot!! -

Fasten the swivel plate first. This plate straddles the joint. Drive 4 screws or nails into the beam and 4 into the post through the swivel plate’s holes. Do not fully tighten if using screws—leave 1/8” for final alignment.

: Run plugtst.exe from the utilities folder to confirm the hardware plug is detected . 3. Advanced Workflow Integration atir strap and beamd with 72 install

Once the beam is seated and the strap is installed, check for "daylight" between the strap and the beam surface. It should be flush across the entire 72-inch run. Conclusion Fasten the swivel plate first